Skip Navigation LinksHome / Offices and Services / IT Service Center / Wireless / Connect Using Windows 7

Connecting to the Babson Secured Network Using Windows 7



1.) Click on the Start menu, then click Control Panel > Network and Sharing Center > Manage Wireless Networks​

2.) Click Add, then click Manually create a network profile.

3.) Enter babson as the Network Name, WPA2-Enterprise as the Security Type, and AES as the Encryption Type as shown in the image to the left, then click Next.​

4.) Click Change connection settings.​

5.) Click on the Security tab, verify that the Network Authentication Method is set to Microsoft: Protected EAP (PEAP), then click the Settings button as seen in the image on the left.​

6.) Click Advanced Settings and check off Specify Authenication Mode if not already checked. Choose User or computer authentication. Click OK.​

7.) Uncheck the box that says Validate server certificate, and ensure that the Authentication Method is set to Secured password (EAP-MSCHAP v2). Next click the Configure... button as shown in the image to the left.​

8.) Uncheck the box that says "Automatically use my Windows logon name...", click OK, click OK again, click OK again, then click Close. Your connection has now been set up.​